You can reset the Panasonic KX-TGP500 either using the handset buttons or via the web interface.
📴 Method 1: Factory Reset Using the Handset #
- Power On
Make sure both the cordless handset and the TGP500 base station are powered on. - Press and Hold Keys
On the handset, press and hold 1 + 5 + 9 + ✱ at the same time. - Wait for Beep
Keep holding until you hear a beep and the handset powers off. - Power Cycle the Base
Unplug the power cord from the base station for 10–20 seconds, then plug it back in. - Reinsert Handset Batteries
Remove and reinsert the handset batteries.
✅ The phone will power back on, and the factory reset will be complete.
📹 Video: 👉 Click here!
🌐 Method 2: Factory Reset via Web Interface #
- Open a browser and enter the base station’s IP address.
- Log in with:
- Username:
admin
- Password:
adminpass
(default)
- Username:
- Go to Maintenance → Reset to Defaults.
- Select Reset to Factory Defaults.
⚙️ Enabling the Web Interface #
If the web interface is disabled, enable it directly from the base station:
- Press Menu on the base unit.
- Go to IP Service → Network Setting → Embedded Web.
- Toggle to ON.
- Select Save.
🔎 Finding the Base Station IP Address #
- Press Menu on the base unit.
- Navigate to IP Service → Network Setting → IP Address.
- Note the IP address displayed.
- Enter this IP into your web browser to access the interface.