If you’ve upgraded the firmware or performed a factory reset on a Polycom phone, the web server may be disabled by default. Follow the steps below to re-enable it:
Steps to Enable the Web Server: #
- On the phone, press the Home icon.
- Navigate to Settings > Advanced.
- Enter the administrator password.
Default password: 456 - Go to Administration Settings > Web Server Configuration.
- You will see options for Web Server and Web Config Mode:
- Set Web Server to Enabled.
- Set Web Config Mode to your preferred option:
- HTTP Only
- HTTPS Only
- HTTP/HTTPS (Recommended)
- Tap the Back button to return.
- Select Save Config to save the settings.

Note: #
If prompted to update the administrator password:
- Enter 456 as the Old Password.
- Enter 1234 as the New Password.
- Confirm the New Password by entering 1234 again.