---
title: Finding the IP Address on Yealink Phones
description: "You can find the IP address of your Yealink phone directly from the phone's display. Follow the instructions below based on your phone model. > **Note:** The IP address is usually listed as **IPv4**. If your phone displays both IPv4…"
url: "https://www.dataphone.cloud/docs/finding-the-ip-address-on-yealink-phones/"
updated: "2026-08-14"
category: Docs
---

# Finding the IP Address on Yealink Phones

You can find the IP address of your Yealink phone directly from the phone's display. Follow the instructions below based on your phone model.

> **Note:** The IP address is usually listed as **IPv4**. If your phone displays both IPv4 and IPv6 addresses, use the **IPv4** address.

---

## T2x, T3x, T4x, and T5x Series

The following models all use the same method:

| Supported Models |
| --- |
| Yealink T21P |
| Yealink T33G |
| Yealink T42S |
| Yealink T43U |
| Yealink T46S |
| Yealink T46U |
| Yealink T48S |
| Yealink T48U |
| Yealink T53 |
| Yealink T53W |
| Yealink T54W |

### Steps

1. Press the **OK** button on the phone.
2. Locate the line labeled **IPv4**.
3. The value displayed is the phone's IP address.

---

## Touchscreen Desk Phones

The following touchscreen models share the same steps:

| Supported Models |
| --- |
| Yealink T57W |
| Yealink T58 |
| Yealink T58W |
| Yealink VP59 |
| Yealink CP925 |
| Yealink CP965 |

### Steps

1. Press the **Settings** (or **Menu**) icon.
2. Select **Status**.
3. Locate the line labeled **IPv4**.
4. The value displayed is the phone's IP address.

> **Note:** Depending on the firmware version, you may see either a **Menu** icon or a **Settings** icon. Both lead to the **Status** screen where the IPv4 address is displayed.

---

## DECT Cordless Phones

The following cordless systems use the same procedure:

| Supported Models |
| --- |
| Yealink W52P |
| Yealink W56P |
| Yealink W60P |
| Yealink W69P |
| Yealink W76P |
| Yealink W79P |

### Steps

1. Pick up any handset registered to the base station.
2. Press **OK**.
3. Navigate to **Status → Base**.
4. The base station's IP address will be displayed on the screen.

---

## Need Additional Help?

If the phone is unable to obtain an IP address or displays **0.0.0.0**, verify that:

- The network cable is securely connected.
- The phone is connected to an active network port.
- The network provides DHCP (automatic IP addressing), or the phone has been configured with a valid static IP address.

If the issue persists, contact your system administrator or IT support for further assistance.